N
The Daily Insight

Which Celestion speaker is best for metal?

Author

James Craig

Updated on March 21, 2026

G12T-75 – Also based on the G12M Greenback, the Celestion T75 has been a very influential speaker for many key metal guitarists over the past 30 years or so, from Glen Tipton and Yngwie Malmsteen in the '80s through to Bill Kelliher and Jon Donais more recently.

Similarly, you may ask, what is the best speaker for metal?

Best Guitar Speakers for Metal in 2021

  • Our Top Three Picks.
  • Buyer's guide: Magnet. Power.
  • Eminence DV-77 Mick Thomson Signature – Our Top Pick.
  • Eminence Swamp Thang – Best Budget Option.
  • Celestion Vintage 30 – KGR Editor's Choice.
  • Final Thoughts.

Additionally, what is Rola Celestion? Basically, it refers to a period of time when Celestion were using a certain type of label on their greenback speakers (Jan 1966 to April 1971). This label did not have the word Rola written on it, so guitar players called them 'pre-Rola' labels to differentiate between the later Rola Ipswich labels.

Secondly, what is the best sounding Celestion speaker?

Best Celestion 12-Inch Guitar Speakers

  1. Celestion Blue. Celestion Blue Guitar Speaker, 15 Ohm. $263.49. 12 inch electric guitar speaker available in 8 or 16 ohms.
  2. Celestion G12M Greenback. Celestion G12M Greenback 12" $179.15.
  3. Celestion Vintage 30. Celestion Vintage 30 Guitar Speaker, 8 Ohm. $139.00.

Are greenback speakers good for metal?

Greenbacks are really warm and smooth, and the lower wattage greenies will break up when you play at high volumes. Keep in mind, I mean at least gigging volume, if you don't gig they'll never break up on you. They sound great for leads, they're very fluid, and full, but for most metal, they're probably not ideal.

Related Question Answers

What are the best car speakers for sound quality?

Table of contents
  • Best Performance: JL Audio C2-650X Evolution Series.
  • Best on a Budget: Pyle Speakers.
  • Best Mid-Range: JBL GTO Series.
  • BOSS Audio Chaos Exxtreme.
  • Rockford Fosgate Prime.
  • Polk Audio db651.
  • Alpine SPS-610.
  • Kenwood KFC-1695PS.

How do I choose an amp for my speakers?

Generally you should pick an amplifier that can deliver power equal to twice the speaker's program/continuous power rating. This means that a speaker with a “nominal impedance” of 8 ohms and a program rating of 350 watts will require an amplifier that can produce 700 watts into an 8 ohm load.

What happened to Celestion speakers?

In 2006 Celestion ceased to manufacture finished professional audio systems and consumer hi-fi / home cinema products, and now focuses on the design and manufacture of lead guitar, bass guitar, professional audio and sound reinforcement speakers.

How good are Celestion speakers?

Very good sound quality, the boxes are small but strong,I use four of these on my home theater, and the sound quality is very good. Strength: Price,design,sound. Very good sound quality, the boxes are small but strong,I use four of these on my home theater, and the sound quality is very good.

How do I choose a guitar speaker?

You'll usually want to select from speakers that have similar power rating specs and exactly the same impedance as those you're replacing. Another consideration is the mounting bolt pattern. Look for speakers that match the layout of your amp or speaker cabinet mounting holes unless you're willing to modify your gear.

Is a 50 watt speaker loud?

So, how loud is a 50-watt speaker? A 50-watt speaker is rated at 101dB @2.83V, they're are extremely loud. Wattage is an indication of how much power a speaker can safely receive from an amplifier before it starts to distort.

What do greenback speakers sound like?

yeah, that's the sound of the greenback. Lots of mids, but kind of a flubby bottom end. A little bit of high end roll off. If you're looking for lots of mids with a good bottom end, i would lean a little more towards the g12h30.

What is the difference between AlNiCo and ceramic speakers?

AlNiCo (Aluminum-Nickel-Cobalt) is an alloy magnet and all alloy magnets are easier to demagnetize than comparable Ceramic (Strontium Ferrite) magnets. The ceramic magnet, on the other hand, doesn't compress or demagnetize as easily, so the voice coil moves to its mechanical limit and won't go any farther.

Can I use my Fender amp as a speaker?

Yes, you can use a guitar amp as a speaker to play music or to possibly plug in a microphone. While a guitar amp won't sound as good as a proper sound system designed to play music, you can achieve decent results when done properly.

Are 10 watt amps good?

A good guitar amp for a beginner is solid-state with a speaker in the 8-12” range. These little amps are usually 10-20 watts. This is more than enough power for a newbie to get started. These amps will let you jam with friends, and many are even loud enough to compete with a drummer.

How do you date a Celestion speaker?

Since 1956, all Celestion chassis drivers have been stamped with a date code (two numbers and two letters), denoting exact date of manufacture. The codes are added on the production line and are placed on the speaker's chassis leg, on the front gasket or, in more recent times, on a label on the magnet edge.

Where are Celestion speakers manufactured?

At Celestion all our guitar speakers are designed in the UK. We still manufacture our “premium” speakers, the Heritage Series G12M, G12H and G12-65 and the Celestion Blue and Gold in Ipswich. The remainder are manufactured in our own factory in China.

What is a Celestion V type speaker?

The V-type is a sweet sounding speaker with a superbly balanced tonal signature that imparts a vintage musicality to your tone. Clean sounds are true across the lows, mids and highs, with just enough upper-mid chime and HF sparkle to add clarity and definition.

When did Celestion start making speakers in China?

2004

What does pre Rola mean?

So what is a pre-Rola? A pre-rola speaker is any Celestion greenback made between roughly Jan 1966 and April 1971, with the 'Celestion Ltd, Thames Ditton Surrey' text at the bottom of the label. Guitarists call them 'pre-rola' because they came before the labels with the 'Rola Ipswich' text on them.