How do I unlock my GOtv signal quality?

How to Improve GOTV Signal Reception Step-by-Step

1. On your remote control, select Menu> Advanced Options and then press OK.
2. Press the arrow pointing upwards then Installation and press Ok.
3. Select Signal Information and press Ok.
4. Move your antenna up or down/ from side to side until the signal is at its highest.

Beside this, how do I fix my GOTV signal strength?

1. On your GOTV remote control, select Menu (lower left corner)
2. You navigate using the arrow buttons (which are arranged into a circle a little above the center) and select using OK.
3. In the GOTV menu bar (by the left), select Advanced Options.
4. Under Advanced options, select Signal Information.

Similarly, what causes no signal in GOTV? However, sometimes one's cable television decoder (all cable televisions' decoders) may loose or fail to receive "signal" due to some factors. These factors may be a Very Poor Weather, Wrong Antenna connection, Wrong Antenna direction, Faulty Antenna, Wire-cut, etc. GOtv, Startimes Wrong Antenna Direction.

One may also ask, how do I clear Gotv no signal?

How to clear error code on GOtv

1. To clear the E016 Error code send the following message “RESET IUC" to 4688.
2. Go to the GOtvNigeria website. Click on "Eazy Self Service" then select "Fix Errors".
3. The most efficient, and sadly the most expensive way, is to call GOtv Customer Service.

How do I fix no signal?

UNPLUG THE CABLE GOING FROM THE TV TO YOUR CABLE OR SAT BOX

-Remove the HDMI cable or other cables from your Cable TV or SAT set top box. -Keep the cable unplugged for 2 to 3 minutes. -Plug the HDMI cable or other cables back in. -Give it some time for the Cable or SAT box to get the signal and initialize.

Related Question Answers

How do you refresh GOtv?

Send a text that says 'Reset + your IUC number' to 4688 (the default GOtv reset code). IUC stands for Identification User Code. It is the unique serial number of your decoder that can be found on a red sticker on the bottom panel of the decoder.

What is the meaning of e48 32 in GOtv?

signal issue

Why is my GOtv decoder showing red and green light?

A combination of GREEN and RED means that there is an error with in the decoder's inner workings. Sometimes this error may not affect how the decoder functions, you will continue to view tv normally but the solid Green and Red will persist on front decoder panels.

How do I check my GOtv signal?

Find a clear site that has no obstructions between the GOtenna and the signal transmitter. Point the GOtenna towards the transmitter. Slowly move your GOtenna to the left or the right until the strongest signal is found. You will be able to see this on the signal lever bar displayed on your TV.

Can GOtv be hacked?

GOtv has been a threat to most country, many hackers find it difficult to bypass the payment security and watch the channels for free. Select your Decoder type, maybe GOtv or HITV, MyTv and others.

How much does it cost to change GOtv decoder?

GOtv Nigeria on Twitter: "You may swap your faulty GOtv decoder for N2,900 at any of our offices near you.

Why is my GOtv audio not working?

- Ensure that the TV volume is turned up and that the MUTE is not active on the decoder. - Ensure that the decoder volume is turned up. - If the problem persists, switch your decoder off at the wall, unplug it and then switch it on again.

How do I fix my GOtv suspension?

When you notice that your GoTV is showing account suspended, you probably have renewed your subscription while your decoder was off. Rebooting your decoder will correct this error and once it's on again, it should be able to reflect your new subscription. Fill this number in the self portal field and click on clear.

How do you clear error code e32 on GOtv?

An Alternative

1. Launch your preferred internet browser.
2. Visit GOTV page by entering the address or click here.
3. Click on the tab 'Easy Self Service'
4. Click Clear Error Code.
5. Fill in your IUC number, select GOTVE16.
6. Enter the Captcha code.
7. Click Clear Error.
8. Error is gone.

What do you do if your TV says no signal?

Note: This message may appear after updating your Android TV™ to the latest software. The TV may be set to an input that does not have a device connected. Make sure the correct input is selected. Verify that the source device has power and is turned on.

Can GOtv work with any antenna?

You can connect two GOtv decoders, two Star times decoders which are of the same kind. Any type of aerial will work be it the GOtv antenna, startimes antenna, Jetta antenna or Ellies antenna. Aerial are simple so even a sufuria antenna will work.

How can I use GOtv without remote?

Here are some solutions to consider.

1. Replace the batteries. The decoder is not responding to your remote control because of low battery power.
2. Clean the transmission window.
3. Check for defectiveness.
4. Use a different remote.
5. Power cycle the decoder.
6. Reset the decoder.
7. Using GOtv without remote.
8. Remove mail from the screen.

How do I activate my GOtv after payment?

Visit Eazy GOTV online, log into your account making use of your surname, and your account number. Then, head to “Clear your error” dialogue box, select E16 and click on “Reset device now” and that should activate your GOTV.

How much is GOtv in Lagos?

The GoTV package comes with a decoder, an antenna popularly called Gotenna and a one-month free subscription. GoTV decoders cost between N6,500 and N7,500 depending on the place and period of purchase.

How do I activate my GOtv account?

Get a GOTV - lagos

Select your City on the drop down menu. Enter your Surname; IUC number and your mobile number. Then click on the green Activate button. To confirm if your activation is successful, click on the Activation Status tab; enter your IUC number and then click on the green Check Activation Status button.

How much is GOtv decoder and antenna?

The decoder comes with an outdoor antenna (a.k.a GOtenna), which offers better reception with better quality video and audio. Initial Gotv access cost is 7,900 Naira for decoder, outdoor antenna, remote, and 1 month free Gotv plus package.