How do I install petsafe wireless collar?

Hold the collar and test light at the level of your pet's height. Walk towards the warning zone until the receiver collar beeps and the test light tool illuminates.

FAQs

1. Plug your transmitter into a standard wall outlet.
2. Turn the transmitter on.
3. Adjust the boundary control knob to 8 and the boundary switch to high.

People also ask, how do I connect my PetSafe transmitter?

Mounting the Transmitter on a Wall

Slide the Transmitter over the bracket Be certain that you can read the PetSafe® logo straight on and not sideways. Plug the adapter into a functional AC wall outlet The power light on the power adapter should turn GREEN. Slide the power switch UP to turn ON the Transmitter.

Beside above, how do I reset my PetSafe wireless transmitter?

1. Remove the receiver collar from your pet.
2. Remove the battery from the receiver collar.
3. At the transmitter, move the boundary switch from the low to the high position.
4. Slowly adjust the boundary control dial up to #8, down to #1 and then back to the #4 position.

Beside this, where should PetSafe wireless fence be placed?

1. 2-4 feet above the floor located on the ground floor of your home.
2. Dry, well ventilated, protected area where temperatures do not drop below freezing.
3. At least 3 feet away from large metal objects.
4. Near a standard wall outlet.

How do wireless pet containment systems work?

Your pet wears a special collar that is programmed to detect the radio signal (called a receiver collar.) If your pet gets too close to the underground wire, the radio signal triggers a 'beeping' noise from the receiver collar that alerts the dog (or cat) to retreat away from the buried wire.

Related Question Answers

Why does my PetSafe collar not work?

If receiver collar still does not activate – remove a wire from the transmitter, try to change the levels. If everything appears to work normally, please contact our Customer Care Center to discuss replacing transmitter. If receiver collar does activate – the boundary wire probably has a partial wire break.

Why is PetSafe collar blinking red?

Charging too often can reduce battery life. Charge your receiver collar when the receiver indicator light blinks red. The system works by sending a radio signal through a buried wire (boundary wire). Your pet wears a receiver collar that picks up the signal.

Are all PetSafe collars compatible?

Important: All PetSafe® wireless fence collars are compatible with all PetSafe® wireless fence systems.

Can you add another collar to PetSafe wireless?

Yes. There is no limit to the number of pets you can contain with the containment system. It's as simple as purchasing an additional compatible receiver collar for each pet. You can purchase additional receiver collars online or contact our Customer Care Center.

How do you test a PetSafe collar?

If you wish to test the battery:

1. Remove your pet's receiver collar from your pet.
2. Take the collar to the boundary area of your containment system and listen for the collar to beep.
3. If the collar beeps or the test light tool illuminates, the battery and collar are working.

Is PetSafe transmitter waterproof?

PetSafe YardMax Battery-Operated In-Ground Dog Fence - Cordless Transmitter for Easy DIY - Waterproof and Rechargeable Collar for Dogs 5lb & Up - from The Parent Company of Invisible Fence Brand.

Does PetSafe wireless fence work?

The PetSafe Wireless Fence provides the safest, simplest form of pet containment ever. Plug in the transmitter some where inconspicuously in your home. The transmitter emits radio signal around your home. While the collar is receiving the signal, your dog is free to run and play in your yard.

What happened to Havahart Wireless Dog Fence?

We apologize for the inconvenience – Havahart® Wireless is no longer available. If you have previously purchased a dog fence system from Havahart® Wireless, we will continue to offer customer support. If you have any questions, don't hesitate to contact our consumer care department at 1-855-5-HAVAHART.

How long do PetSafe collars last?

3-4 years

Where do the invisible fence flags go?

The flags should be placed just inside of your boundary zone, where the beep happens. To place your flags: Take the collar receiver and walk out to where your boundary wire is located. Hold the collar receiver at the height of your dog's neck.

What is the best wireless fence for large dogs?

IV. The 3 Best Wireless Dog Fences

• Our #1 Pick : PetSafe Wireless Dog and Cat Containment System. VIEW AT AMAZON. Our overall favorite wireless dog fence comes from the inimitable PetSafe.
• PetSafe Stay and Play Compact Wireless Fence. VIEW AT AMAZON.
• PetSafe PIF-300 Wireless 2-Dog Fence. VIEW AT AMAZON.

How do I increase the shock on my PetSafe collar?

Increase the Static Correction Level by pressing and releasing the Correction Level Button within 5 seconds of the previous flashes. The Static Correction Levels increase from 1 to 5. Pushing the Correction Level Button while the Receiver Collar is on level 5 will cause the Receiver Collar to revert to level 1.

How long do you leave invisible fence flags up?

Q - How long should the owner leave the flags up? A - The flags should remain for at least 2 weeks, but in some cases as long as 30 days.

Will my neighbors invisible fence interfere with mine?

Q. Will my neighbors' invisible fence interfere with mine? Neighboring invisible fences can interfere with each other. Two wires that run too closely together can cancel each other's signal, effectively allowing your dogs to travel back and forth between yards.