N
The Daily Insight

Does a 2005 Chevy Silverado have a chip in the key?

Author

James Olson

Updated on March 07, 2026

The 2005 chevrolet silverado does not include a transponder chip in the key.

Similarly, you may ask, does a 2006 Chevy Silverado have a chip in the key?

Same as the key you can purchase at your local Chevrolet dealership. This key blank for your 2006 Chevrolet Silverado does NOT have a transponder chip in the head of the key, so it does not need any programming. Once the key for your 2006 Chevrolet Silverado is cut, you can start using it.

Beside above, when did GM start putting chips in keys? 1997

Herein, how do I know if my truck key has a chip?

Contact a locksmith. Give the locksmith the make, model and year of your car, and they should be able to find out if your car key has an electronic chip. Assume that your car has an electronic chip if it is a model made after 1995.

How do I get a replacement key for my Chevy Silverado?

Generally speaking, you have three options:

  1. Call an automotive locksmith that offers a mobile service for Chevrolet Silverado cars. We can help you with that.
  2. Tow the car to the dealer.
  3. Order a key online and have the dealer or locksmith cut and program it for you (if necessary).

Related Question Answers

Does AutoZone make spare keys?

AutoZone takes the keys and duplicates them to a precise accuracy. The keys are also cut digitally, using state-of-the-art equipment, tools and technology. Your key will be cut to your satisfaction before you leave your AutoZone, or they will cut it over again.

How do I know if my PASSLock is activated?

Most PASSLock-equipped vehicles have a telltale indicator in the instrument panel. When a PASSLock-equipped vehicle is being started, the instrument panel warning light for PASSLock remains on until the engine starts.

Can a Chevy dealer make a key?

You can order a new key from any Chevy dealer or locksmith. The price can vary depending on if your Chevy has a transponder key, security chip, or VATS. If your Chevy is a 2006 or newer vehicle, it may also need to be programmed. The cost to program a new Chevy key at the dealer ranges between $60 and $180.

Can you get a key made for a car with the VIN number?

As long as you can prove ownership of your vehicle a car key can be made with the Vehicle Identification Number aka VIN number. Once a key code is pulled from the VIN number a car key can be cut. *However most vehicles keys also have transponders in them and need be programmed to the car.

Does a 2007 Silverado key have a chip?

Like most late model vehicles, this 2007 Chevrolet Silverado key has a circuit, chip hidden inside the head of the key. Most of us are not aware of the fact because the chip is not visible and molded inside of the black plastic head.

How can I get a new key for my truck?

If you lose it: You could call a locksmith, who can come and make you a new key on the spot. In some cases—an unusual or older vehicle—a locksmith may not be able to help. You might need to buy a new ignition lock cylinder and key from the dealer or an independent repair shop.

Can you bypass transponder key?

There is more than one way to bypass a transponder key. If you have some skills with electronics, you may consider permanently rewiring your ignition. Purchasing a bypass kit for your vehicle can give you a completely keyless vehicle. Glue the transponder head to the inside and replace.

Does WalMart cut chip keys?

WalMart, as well as many other places, can CLONE your key with a system that reads the transponder code and creates a duplicate of that code on a new key.

Can you bypass PATS system?

Can you bypass the PATS system? Yes, there is a simple way to bypass the pats system on your own. All you need is the transponder key to trick the system. By having the transponder key, you can remove the chip inside the key and glue it to the ignition and use any key that matches the original to start up the engine.

Can you program your own transponder key?

DIY Reprogramming a Transponder

The vehicle owner can reprogram their own transponder keys under special conditions. First, the vehicle must be domestic. Second, the vehicle identification number (VIN) needs to start with a 1 or 4.

What year did Toyota start putting chips in keys?

1998

What year did they start putting chips in car keys?

1985

Can a locksmith make a transponder key?

In most cases a locksmith is able to program a transponder key, but there are rare cases when a locksmith won't be able to do it, usually because of dealer restrictions. In order for a locksmith to program the key they will need to have the necessary equipment.

Does a valet key have a chip?

At least the original valet key that came with your car will already have an authorized chip. If you think you may have locked your keys inside the car, you could get a cheap replacement made that will get you in the door using the hidden keyhole. Then if you find your keys inside, you'll only be out a few bucks.

Does Home Depot make transponder keys?

Home Depot does have a limited selection of transponder chip keys that can be cloned at some Home Depot locations. Home depot transponder chip car keys range from $39 - $80. Keep in mind many car keys now have buttons on them for keyless entry access which home depot does not sell.

Why did GM have 2 keys?

Several senior GM executives interviewed say the automaker has not changed to a single key because two keys better prevent dishonest parking attendants from opening the trunk. But at GM, a single key also was made impossible by an anti-theft feature the automaker introduced in the 1980s to cut down on a wave of thefts.

Can you disable PassLock?

The Passlock system uses a recognition transponder in the ignition tumbler and a computer chip in the ignition key. While you cannot remove the Passlock system, you can disable it by tricking it into thinking the Vehicles had a malfunction.

What year did GM start using vats?

1986

Does a 2002 Chevy Silverado have a chip in the key?

This key blank for your 2002 Chevrolet Silverado does NOT have a transponder chip in the head of the key, so it does not need any programming. Once the key for your 2002 Chevrolet Silverado is cut, you can start using it.

What is a pk3 key?

GM has first used transponder chip keys in 1997, but were slow to phase the technology in. Today, GM uses transponders on most of their models. Most GM original transponder chip keys have either a PK3, PK3+ or just a "+" stamped on them. GM also uses a technology called Pass Lock on some cars from 1996 to 2007.

How do you program a chipped key?

How to Reprogram a Transponder Key
  1. Enter your vehicle and put the key into the ignition and turn it to the "ON" position.
  2. Before 45 seconds pass, turn the key to the "OFF" position.
  3. Repeat the above step by turning the key to the "OFF" position within 45 seconds.
  4. Turn key to the "OFF" position and then back to "ON." The key is now programmed.

How does the GM VATS system work?

VATS is a General Motors (GM) security system that has a resistor embedded in the blade of the key. If the correct resistance is read, the VATS Module, through a relay, will allow the starter to crank the engine and also send a signal to the ECM to allow the operation of the fuel injectors.

What is a transponder key used for?

Transponders keys provide a higher level of security for vehicles in two ways. They help deter and prevent car theft by rendering 'hot wiring' or breaking the ignition lock ineffective. If the car doesn't detect the key's microchip or the exact serial number, it won't start.

Can a dealership cut a key with just the VIN number?

As long as you can prove ownership of your vehicle a car key can be made with the Vehicle Identification Number aka VIN number. Once a key code is pulled from the VIN number a car key can be cut. However most vehicles keys also have transponders in them and most be programmed to the car.

How do you reset the anti theft system on a Chevy Silverado?

In a chevy silverado, you will try to reset the anti-theft system by turning the key on until the yellow lock goes out on the instrument panel for about 10 minutes. turn the key off and do it 2 more times after 3 cycles, pull the key and put it back in.

Where can I get a Chevy key cut?

A Auto locksmith will be able to make a copy for most types of car key – either a standard remote fob or a transponder key. Many MLA locksmiths who provide a Auto Locksmith Service do Car Key Cutting .

How much does it cost to have a key laser cut?

Table: Total Cost to Make a Car Keys By key Type
Cost of the Key/Fob Total Cost of Duplicate Key Cut & Programmed
VATS Car Key $ 20 $ 20
Transponder Car Key / Chip Key $ 10 $ 60
Laser Cut Car Key (High Security) $ 50 $100
Proximity FOBs $ 75 $125

How much is it for a replacement key?

If you lose the key and fob, you can expect a dealer replacement and programming to cost $200 or more, depending on the vehicle and the key's design.